The plant uses N-type bi-facial Monocrystalline silicon Modules with a peak power of (605 ,610 & 615) W, and the technology of the cells is Si-mono. The PV solar modules will be mounted on North-South oriented one-axis solar trackers, integrated on metallic structures combining galvanized steel, forming a structure fixed to the ground. Single-axis trackers are designed to minimize the angle of incidence between the incoming sun rays and the photovoltaic panel plane of array. The tracking system consists of an electronic device capable of following the sun through the day. The inverter used will convert the direct current produced by the photovoltaic modules to alternating current. One or several DC-to-AC power conversion stages, each equipped with a maximum power point tracking system (MPPT). The LV/MV transformer is installed in the container and for outdoor installation. The main transformer of the PV substation is a three-phase oil immersed in three winding on load voltage regulating transformer. Power Transmission through Overhead Transmission line to the Existing SEC substation. The operation voltage is 110kV.